Micro USB OTG

Micro USB OTG is an extension of the data processing function, allowing data to be read from USB devices without requiring a PC. The device has basically become a USB host. At this level, USB OTG expanded many additional useful functions for android tablet pc.

What is Micro USB OTG?

OTG is The abbreviation of On-The-Go. This technology was published by USB Implementers Forum On December 18, 2001, and began to be popularized in The market around 2014. USB OTG technology is mainly based on the development and popularization of USB technology and is fully compatible with the USB2.0 protocol.

Micro USB OTG

Using Micro USB OTG can be separated from PC equipment and use USB ports on various equipment for data exchange. It solves the problem of inconvenient data exchange of connection interfaces of different systems between various devices.

In other words, OTG is mainly applied to the connection between various devices, especially various mobile electronic devices on the market, such as android tablet pc, mobile phones, printers, consumer electronic devices, etc.

It can be seen that when using OTG, different OTG types should be selected according to the interface of the device. When using USB OTG functions, the following conditions are required:

  • Device connection: use OTG connection line/adapter for different device interfaces.
  • Data storage: a USB flash disk with a corresponding interface can be directly inserted into the android tablet pc.

Once you’re ready with Micro USB OTG for your android tablet pc, a world of opportunities opens up.

Micro USB OTG Related Post

10 USB OTG expanded functions on android tablet pc
Micro USB OTG

10 USB OTG expanded functions on android tablet pc

USB OTG is an extension of the data processing function, allowing data to be read from USB devices without requiring a PC. The device has basically become a USB host. At this level, USB OTG expanded many additional useful functions for android tablet pc.

Read More »
The difference between RS232, RS485 and USB serial interfaces
android board

The difference between RS232, RS485 and USB serial interfaces

RS232 and RS485 have always been the common interfaces of weak current. The two serial ports have a lot of basic knowledge, including electrical characteristics, mechanical characteristics, link layer, transmission control and other aspects, this article will compare two common interfaces from a simpler perspective and from the differences between the two sides. And from the current practical point of view, such as RS232 and RS485 conversion, and USB conversion, etc.

Read More »
If you need more information,  please send us a message…
Or,  More ways to connect with us…

Linda Liu

Sales Manager
If you would hit the mark, you must aim a little above it. Every arrow that flies feels the attraction of earth.

Sandy Huang

Support Supervisor
If you wish to succeed, you should use prudence as your brother and hope as your sentry.

Mina Xiao

Public Relations
In the end, it’s not the years in your life that count. It’s the life in your years.
Scroll to Top

Get in touch!

Where can I reach you?
What would you like to discuss?